Your WORX Landroid M robotic mower handles the daily grass cutting with ease, but even the best robot can benefit from a few upgrades. Whether you are dealing with wet grass, steep slopes, or simply need fresh blades, the right accessories keep your mower running efficiently. In this guide, we have gathered the top-rated products for the WORX Landroid M series, from replacement blades and traction wheels to wire connectors and wheel spikes. These picks come from brands like WORX, Cilivo, EMBergSupply, and more, each chosen for their reliability and real-world performance. If you own a WORX Landroid and want to get the most out of it, this is the place to start.
Pros
- Wide compatibility with many Worx Landroid models
- Sharp double-sided blades for efficient cutting
- Easy screw-in installation with included hardware
- Excellent value with 24 blades in one pack
- Reliable customer service for quality issues
Cons
- Not original Worx parts, may differ slightly from OEM blades
- Large 24-pack may be excessive for small lawns with infrequent blade changes
- Compatibility list is extensive but not guaranteed for every model variation
The Cilivo WA0190 replacement blade kit is a practical and cost-effective solution for owners of Worx Landroid robotic mowers. Designed to fit a wide range of models including the WG794, this 24-pack provides enough blades for multiple seasons of lawn care. It is especially suited for those who prefer to keep a stock of spare parts on hand rather than ordering individual replacements.
Each blade features a double-sided sharp edge that cuts grass cleanly on both sides, extending the usable life of each blade. In real-world use, these blades perform well on various grass types and terrains, delivering a consistent cut that keeps lawns looking manicured. The included screws make swapping old blades for new ones quick and tool-friendly, minimizing downtime for the mower.
The build quality is solid for a replacement blade set. The metal is sturdy enough to handle regular mowing without bending or dulling prematurely. While they are not original Worx parts, they are manufactured to close tolerances that ensure a snug fit and reliable operation. The 24-blade count is a standout feature, offering significant savings compared to buying smaller packs or individual blades.
A potential drawback is that the kit may include more blades than needed for very small yards, and some users might prefer the assurance of OEM parts. Additionally, while compatibility is broad, it is always wise to double-check fitment for specific older or newer model variants. However, the responsive customer service team is available to address any fitment or quality issues quickly.
Overall, the Cilivo WA0190 replacement blade kit is a smart purchase for Worx Landroid owners who value convenience and economy. It delivers dependable performance, easy installation, and excellent value, making it a recommended accessory for maintaining a robotic mower's cutting efficiency throughout the year.
Color: Original
Dimensions: 2 x 0.2 x 0.3 inches
Product Group: Lawn & Patio
Binding: Lawn & Patio
Compatible Models: Worx Landroid WR140, WR143, WR165, WR147, WR155, WR150, WR153, M500, M700, M800i, M900, M1000, M1000i, M1200i, L1500, L1500i, L2000, L2000i, S300, S500i, S450i, S700i, WR130E, WR140, WR150, WR141E, WR142E, WR143E, WR153E, WR155E, and more
Pros
- Double sided blades dramatically extend usage time between replacements.
- Titanium coating adds corrosion resistance and smoother cutting action.
- Includes 18 blades and 18 screws, offering long term value.
- Broad compatibility with many Worx Landroid robotic mower models.
- Simple replacement process that takes under a minute per blade.
Cons
- Only compatible with Worx Landroid mowers, not universal for other brands.
- Exact fit should be confirmed for older or less common Worx models.
- Titanium coating may not provide a noticeable benefit on very short grass.
The EMBerg Endurance Blades are a reliable replacement option for owners of Worx Landroid robotic mowers. This 18 pack is specifically designed for popular models like the S300, M500, L1500, and L2000 series, making it a convenient bulk solution for regular blade maintenance.
The standout feature is the double sided design. When one edge becomes dull, you can flip the blade and continue mowing with a fresh cutting surface, effectively doubling the lifespan of each blade. Combined with the titanium coating, these blades deliver clean cuts while resisting wear and rust.
Each blade is made with sharp cutting edges and comes with its own screw for straightforward installation. Changing a blade takes less than a minute, since all you need to do is remove the old screw, fit the new blade, and tighten it back in place. The kit provides enough spares to cover several months of typical use.
As a dedicated accessory, these blades are only compatible with Worx Landroid mowers. Before purchasing, double check your specific model number against the compatibility list, as some older or less common versions may have different blade dimensions. The titanium coating adds a slight premium over standard steel blades, though the extended lifespan helps offset the cost.
Overall, the EMBerg Endurance Blades are a practical and affordable way to keep your robotic mower cutting efficiently. With the convenience of a double sided edge, an included screw for every blade, and broad compatibility, they are an excellent choice for Worx Landroid owners who prefer minimal maintenance and maximum value.
Pros
- Cost-effective 30-pack with screws included.
- Broad compatibility with many Worx Landroid models.
- Durable material maintains sharpness over time.
- Easy installation saves time on maintenance.
- Promotes healthier lawn growth.
Cons
- No reviews available yet to confirm long-term performance.
- May not fit all robotic mower brands, only Worx Landroid.
- Blade dimensions are specific; verify compatibility with your model.
The Terre Products 30-Pack Robotic Lawn Mower Replacement Blades are designed specifically for Worx Landroid robotic mowers. This set includes 30 blades and 30 screws, making it a convenient and economical choice for homeowners who want to keep their mower cutting effectively without frequent purchases. It is ideal for those with multiple mowers or who prefer to have spare blades on hand.
Each blade measures 36mm by 18mm and is crafted from high-quality materials that promise a superior cutting edge. Users can expect a clean and precise cut, which is essential for maintaining a healthy lawn. The blades are built to withstand regular use and retain sharpness over an extended period, reducing the need for constant replacements.
The blades are silver in color and come with matching screws for easy installation. The design emphasizes user convenience, allowing quick swaps so you spend less time on maintenance and more time enjoying your lawn. The precise cutting action also promotes healthier grass growth by encouraging even trimming.
One potential drawback is the lack of customer reviews to validate real-world durability. Additionally, compatibility is limited to Worx Landroid models, so owners of other robotic mower brands will need to look elsewhere. It is important to double-check your specific mower model against the listed compatible models before purchasing.
Overall, the Terre Products replacement blades offer a practical and affordable solution for Worx Landroid owners. With a generous pack size, durable construction, and easy installation, they are a solid choice for maintaining a well-manicured lawn. If you need a reliable supply of blades, this pack is worth considering.
Pros
- Includes both drill bit and mounting tool for hassle-free installation
- Versatile compatibility with multiple popular robotic mower brands
- Large 100-count kit allows customization of traction level
- Simple, effective upgrade that improves performance on slopes and wet grass
Cons
- Drill not included, so you must have one to install the studs
- May not fit all robotic mower models; check compatibility before buying
- No customer reviews yet, so real-world feedback is limited
The EMBerg Robotic Lawn Mower Wheel Studs Kit is a practical accessory designed to boost traction on popular robotic mowers like Husqvarna Automower, WORX Landroid, and Robomow. If your mower struggles on slopes, wet grass, or loose soil, this kit offers a straightforward fix to keep it moving efficiently.
With 100 studs in the box, you can decide how many to install based on your lawn's challenges. The kit includes a drill bit and mounting tool, making installation simple as long as you have a drill. Users appreciate that they can add just a few studs for mild slopes or more for extreme terrain.
Build quality appears solid with silver metal studs designed to withstand outdoor use. The studs are intended to bite into grass and soil without damaging the mower's wheels. Since the product is new to market, long-term durability is unverified, but the brand has a reputation for reliable robotic mower accessories.
One drawback is the need for a drill, which some users may not have readily available. Additionally, compatibility is not universal, so it's wise to confirm your mower model works with these studs. The lack of customer reviews means we rely on the product's stated features and brand trust.
Overall, this kit is a smart investment for robotic mower owners facing traction issues. Its generous stud count, included tools, and broad compatibility make it a convenient solution. For the price, it offers a simple way to improve mower performance on tough lawns.
Pros
- Easy to install with included screw, no modifications needed.
- Improves traction on slopes and slippery surfaces significantly.
- Durable plastic construction resists rust and corrosion for long life.
- Compatible with several popular Worx Landroid L models.
- Helps prevent lawn damage from wheel spin.
Cons
- Plastic material may not be as strong as metal alternatives under extreme stress.
- Only compatible with specific Worx models, not universal for all robotic mowers.
- No customer reviews yet to confirm real-world performance over time.
The aeobdai Anti-Skid Wheel Spikes are a simple yet effective accessory for owners of Worx Landroid L robotic lawnmowers. These spikes attach directly to the wheels to provide extra grip on wet grass, slopes, and uneven terrain where standard tires may slip. They are ideal for anyone who has noticed their mower struggling on inclines or leaving ruts after rain.
The standout feature is the enhanced traction these spikes deliver. By adding plastic teeth to the wheel surface, the mower gains better purchase on the ground, reducing slippage and allowing it to navigate tricky areas more reliably. Installation is straightforward: just center the spike on the wheel and tighten the included screw. Most users can have them fitted in minutes without any special tools.
Build quality is decent for the price. The spikes are molded from a tough plastic that resists corrosion and rust, which is important for outdoor use in damp conditions. While plastic is lighter and quieter than metal, it may not hold up as well against sharp rocks or heavy abuse over many seasons. However, for typical lawn care, they should provide a good lifespan.
One potential drawback is the limited compatibility. These spikes are designed specifically for Worx Landroid L models (such as WR153E, WR155E, WR147E.1, and WR148E). They will not fit other brands or models. Also, since the product is new with no customer reviews yet, long-term durability remains unproven. But based on the materials and design, they appear to be a solid value.
Overall, if you own a compatible Worx mower and need better grip on slopes or wet grass, these anti-skid spikes are a worthwhile investment. They address a common problem with a simple, low-cost solution that installs quickly. For the price, they offer a noticeable improvement in mowing performance and lawn protection.
Color: Black
Material: Durable plastic (corrosion and rust resistant)
Compatibility: Worx Landroid L models WR153E, WR155E, WR147E.1, WR148E
Quantity: 1 pair (2 spikes)
Installation: Center spike on wheel, secure with included screw
Product Group: Lawn and Patio Accessories
Pros
- Weather-resistant construction ensures reliable performance in various outdoor conditions
- Easy to install, even for beginners, with no soldering or crimping needed
- Customizable lawn zones allow you to protect flower beds, gardens, or other sensitive areas
- Compact and durable design fits neatly along wire paths without creating tripping hazards
- Specifically designed for WORX Landroid systems, guaranteeing compatibility and optimal performance
Cons
- Only compatible with WORX Landroid boundary wire, limiting use with other brands
- May require additional connectors for very large or complex lawns, increasing overall cost
- No reviews available yet, so long-term durability is unproven in real-world use
The WORX WA0198 5-Piece Outdoor Rated Wire Connectors are a specialized accessory for owners of WORX Landroid robotic mowers. Designed to join two separate lengths of boundary wire, these connectors are essential for those with large, irregular, or obstacle-filled lawns. If you need to extend your perimeter loop or create no-go zones for your mower, this kit provides a simple, reliable solution.
Each connector is built to withstand outdoor conditions, including rain, UV exposure, and temperature fluctuations. This outdoor rating means you can install them and trust they will maintain a solid connection season after season. The compact dimensions (0.95 x 0.92 x 0.56 inches) allow for discreet placement along your wire path, blending into the lawn without creating visual clutter or tripping hazards.
Installation is straightforward and requires no special tools. Simply insert the ends of the boundary wire into the connector and snap it closed. This DIY-friendly process saves you the cost of hiring a professional and allows you to customize your lawn layout exactly as needed. The connectors are particularly useful for creating restricted areas, such as flower beds or gardens, where you want the mower to avoid.
One potential drawback is that these connectors are specifically designed for WORX Landroid systems, so they may not work with other robotic mower brands. Additionally, for very complex lawns with many wire connections, you may need to purchase multiple packs, which can add to the expense. As there are no customer reviews yet, long-term reliability is not fully confirmed, but WORX's reputation for quality tools offers some assurance.
Overall, the WORX WA0198 Wire Connectors are a practical, well-engineered accessory for any Landroid owner looking to manage their lawn's perimeter wire effectively. They offer a balance of durability, ease of use, and targeted functionality. For the price, they provide a cost-effective way to expand your mower's capabilities and protect sensitive areas of your landscape.
Pros
- Dual-sided blades double the useful life.
- Includes screws for each blade.
- Simple installation process.
- Specifically designed for WORX Landroid WG794.
- Good value with 12 blades.
Cons
- Only compatible with WG794 model, not other Landroid versions.
- May require frequent replacements if mowing large lawns.
- No performance data from user reviews yet.
The WORX WA0190 blade kit is designed exclusively for the WORX Landroid WG794 robotic lawnmower. It includes 12 replacement blades and the necessary screws, making maintenance straightforward for owners who want to keep their mower cutting efficiently.
The standout feature is the dual-sided blade design. Each blade can be flipped when one edge dulls, effectively giving you 24 cutting edges from a 12-pack. This extends the life of each blade and reduces the frequency of replacements.
Installation is simple: remove the battery, wear gloves, flip the mower over, unscrew the old blade, and screw in the new one. The kit comes with extra screws, so you won't run out.
While the blades are small and lightweight, they are made to WORX's engineering standards. They should provide clean cuts and keep your lawn neat without overtaxing the mower's motor.
However, note that this kit only fits the WG794 model. Also, there are no user reviews yet to confirm long-term durability. But for the price and quantity, it's a practical investment for maintaining your Landroid. Overall, it's a recommended purchase for WG794 owners who want hassle-free blade replacements.
Color: Silver/Gray
Size: Replacement Cutting Blade
Dimensions: 1.25 x 0.69 x 0.06 Inches
Weight: 0.000625 Pounds
Compatibility: WORX Landroid WG794
Includes: 12 blades and screws
Buying Guide
Blade Quality and Longevity
The cutting blades are the heart of your robotic mower. For the WORX Landroid M, you want blades that stay sharp over multiple mowing cycles and are easy to replace. Look for double-sided blades, when one edge dulls, flip it over for a second life. Many aftermarket options, like those from Cilivo and EMBergSupply, come with screws included, making swaps a five-minute job. For a large lawn, buying in bulk (18 or 30 packs) saves time and ensures you always have a fresh set ready. Check our WORX Landroid S accessory guide for additional blade options that also fit M series models.
Traction on Slopes and Wet Grass
If your lawn has slopes or stays damp after rain, standard wheels can slip and dig ruts. Traction wheels with galvanized steel spikes or add-on wheel studs provide the grip your mower needs. Products like the Cryspearl Traction Wheels bolt directly onto the existing 205mm wheels, while stud kits from EMBergSupply let you add dozens of metal pins for custom traction. For the WORX Landroid L model, dedicated spike kits from aeobdai and dcvbny offer a stainless steel solution that resists rust. Choose based on how steep your terrain is, spikes for moderate slopes, full traction wheels for challenging grades.
Wire Connectors and Boundary Setup
A reliable boundary wire is essential for keeping your mower within its zone. The WORX WA0198 outdoor rated wire connectors let you splice multiple wire sections or create restricted areas. These connectors withstand rain and sun, so you can bury them or leave them above ground. For complex lawns, having a few extra connectors on hand simplifies installation and repairs. Browse our full accessories collection for more wire management solutions.
Material and Build Quality
Accessories that live outdoors must resist corrosion, UV rays, and physical wear. Stainless steel spikes and galvanized traction wheels hold up season after season. Plastic spikes are lighter and cheaper but may crack under heavy use. For blades, titanium coating (found on the EMBerg Endurance blades) adds extra hardness and reduces the frequency of replacements. Always check that screws and mounting hardware are included, nothing worse than opening a pack and finding missing parts. Learn how to maintain blade sharpness to extend the life of your cutting system.
Final Thoughts
After reviewing the top accessories for the WORX Landroid M, two products stand out for different needs. For everyday blade replacement, the EMBerg Endurance Blades (18 Pack) offer double-sided use and a titanium coating that keeps your mower cutting cleanly for weeks. If your lawn has tricky slopes or wet patches, the Traction Wheels for Worx for Landroid S/M Robots provide immediate grip and prevent turf damage. Whichever accessory you choose, these upgrades will help your WORX Landroid M deliver a manicured lawn with less effort.
Related Guides
Frequently Asked Questions
Can I use WORX Landroid S blades on the M model?
Yes, most replacement blades designed for the WORX Landroid S series also fit the M series. The blade size (36mm x 18mm) is standard across many models. Always double-check your mower’s model number, but in our experience, blades from brands like Cilivo and EMBergSupply work on both S and M robots.
How often should I replace the blades on my WORX Landroid M?
It depends on lawn size and grass type. For a typical half-acre lawn, plan to replace blades every 4 to 6 weeks during the growing season. With double-sided blades, you can flip them once before needing a fresh set. Inspect the cutting edges monthly, if the grass looks torn rather than cleanly cut, it’s time for a swap.
Will traction wheels fit all WORX Landroid M models?
Most traction wheels and spike kits are designed for the 205mm wheels found on S and M series robots. Models like the M700, M1000, and S450i are compatible. For the L series (WR153E, WR155E), you need specific L model spikes. Always verify your wheel size before purchasing. See our guide to WORX 4WD mowers for more terrain-handling options.
Can I install wheel studs without drilling?
Some stud kits, like the EMBerg Robotic Lawn Mower Wheel Studs, require pre-drilling holes in the wheel. The kit includes a drill bit and a mounting tool. If you prefer a no-drill solution, look for pre-assembled traction wheels that bolt directly onto the existing hub.
